What fluid do I need - CDM Fabrication

Home

What kind of fluid do I need?

	Capacity	Fluid Type
4.0 including Filter	6 Quarts	10w30
2.5 including Filter	4 Quarts	10w30
2.4 including Filter	4 Quarts	10w30
AX5	3.5 Quarts	75w90*
AX15	3.4 Quarts	75w90*
NV1500	2.4 Quarts	Syncromesh
NV3550	2.4 Quarts	Syncromesh
32RH Filter Change	4 Quarts***	ATF+3**
32RH Total Capacity	8 Quarts***	ATF+3**
42RLE Filter Change	3 Quarts***	ATF+4
42RLE Total Capacity	5 Quarts***	ATF+4
NP231	1.15 Quarts	Dexron III
4.0 Radiator	2.6 Gallons	50/50 Water/Antifreeze
2.5 Radiator	2.25 Gallons	50/50 Water/Antifreeze
YJ Dana30	1.25 Quarts	75w90*
YJ Dana35	1.5 Quarts	75w90*
TJ Dana30	1.2 Quarts	75w90*
TJ Dana35	1.75 Quarts	75w90*
TJ Dana44	2.0 Quarts	75w90*

*I personally prefer to use 80w90 as its more common, and generally cheaper. Also if your axle has a trac-loc/posi unit, a special additive is required.

**ATF+4 is a better replacement than ATF+3, it is normally recommended that you flush out ATF+3 and replace with ATF+4

***Actual fluid required will vary from vehicle to vehicle, always check the fluid level before driving your Jeep.

Related Topics: | Maintenance Intervals: | GL3/GL5 Gear Oil Ratings: | Torque Specs: | Related Writeups: | Manual Transmission Fluid Change | Changing Differential Fluid |

Back